Proper transformer oil conditioning has become an important factor in production, commissioning, repair and
overhaul of transformers. The transformer oil electric properties
resp., it's puncture strenght, insulating resistivity and loss
coefficient, depend considerably on the moisture and gas content in the insulating oil. The oxygen conent has influence on the aging process
resp., on oxidation, which results in an increased loss coefficient
and in deposit formation. The majority of transformer's
breakdowns and downtimes are caused by bad oil condition.
“KONDIC” Company is involved in the production of several types of machines, which perform the following operations:
- oil drying (separation of free and dissolved water),
Our Units, depending of their type, are cheaper up to 50% of foreign producers, thereby excluding any transportation costs, duties and other cost.
All essential parts of the Unit (vacuum pump, gear pump, electromagnetic
Decontamination of PCB contaminated equipment is performed on‐site using Institute Nikola Tesla patented technology („Process for simulatenous removal of polychlorinated byphenyls, anticorrosive
desulphurization and regeneration of mineral insulating oils“).
High level of PCB reduction, down to 1 ppm is achieved by this process.
After PCB decontamination, equipment and oil are used again.
Developed Technology complies with Best Available Technology (BAT) and Best Environmental Practice (BEP) recommendations.
Capacity of the mobile unit is from 1.5 to 3 tons per day.
TRANSFORMER OIL TREATMENT PLANT - FILTRATION - PURIFICATION
||YAMADA Pumps||UR Pumps||TELLARINI Pumps||ARGAL Pumps|